for PlayStation 3


Universal Remote Control


  Go to
Overview Wizard Manual FAQ Support

Set Surround Sound as Punch Through Master


To set your Surround Sound System as the Punch Through Master complete the following steps:
(These steps assume your Surround Sound System is set up using Aux device button)

  Step 1: Enter setup mode by holding the Aux button down for 3 seconds. After 3 seconds all of the device buttons will blink to confirm that you are in setup mode.  
  Step 2: Press the Mute key and now volume commands will be routed to your Surround Sound System.  
  Optional: You may want to still have the ability to turn the TV volume up and down. Do do this, turn punch through off for your TV.  

If you have completed these steps and punch through is not working as your expect, please visit Surround Sound Repair Instructions.

Back to Punch Through Wizard








©2009 SMK-Link Electronics, Inc. SMK-Link, the SMK-Link Logo, and Blu-Link are all trademarks of SMK-Link Electronics, Inc. Sony, PlayStation, and PS3 are trademarks or registered trademarks of Sony Computer Entertainment Inc. Bluetooth is a trademark or registered trademark of Bluetooth SIG Inc. All other trademarks are trademarks or registered trademarks of their respective holders.